Product DetailsBundle and save with this ultimate X-Carve Upgrade Kit. Increase your X-Carve’s rigidity, torque, and material removal rate—3+ times faster—in just 2 1/2 hours. Reduce chatter and increase accuracy with these rock-solid upgrades to take your X-Carve to the next level!
- Nearly doubles the carvable work area of your X-Carve
- Increases gantry clearance from 2.5” to 4.5”
- Increases maximum pass-through sheet width from 34.75” to 37”
- Improve your material removal rate by 3x
- Upgrades motors for more than 50% more torque
- Replaces the 6mm wide 2GT belts with 9mm wide 3GT belts
- Improves accuracy and reliability
- Reduce adjustments and maintenance needs
- Unique shape prevents potential interference with dust boot when machine is at XY home
- Keeps shavings within the work area of the machine
NOTE: 2015 Model X-Carve Machines (purchased before Sept. 2016) will need additional components to be compatible. The updated X, Y1, Y2, and Z stepper motor cable assemblies are needed to connect to the motors. The X-Controller Kit is necessary to run the upgrades to their full potential.
NOTE: The Z-Axis Direct Drive Assembly is not a user-serviceable part. If there are any issues, please contact our Customer Support Team.
- Choosing a selection results in a full page refresh.
- Opens in a new window.