This is a take on the old school tumbler toy with Peter falling down the stairs
You are free:
Under the following conditions:
With the understanding that:
Thickness: 1/2 in, Dimensions: 12 in × 24 in
Cut out the file on your X-Carve
Take the two tabs and glue them into the two slots in the frame
If you are not changing the object that tumbles down the stairs and keeping it Peter, then paint (if you are good) or print out a picture, cut it out and glue it onto the wood in the shape of Peter.
Cut to size and glue in two 1/4" dowels into the holes in Peter.
Put him at the top and watch him fall down!