Special Offer: Up to 17% off the new X-Carve Pro

Hurry! Offer ends on 05/28 (17 days left)

Call us: (312) 775-7009
Email: help@inventables.com
Mon - Fri: 9am - 5pm CT | Sun: 12-4pm CT

Line-Loc Pipe Clamp

35 likes
106 opens
53 copies
3 comments
Dallas Powers

Project by

Dallas Powers

General Information

3/4 PVC pipe clamp for the z motor

Like this project Open in Easel®
Material Description Price
Black Delrin® Sheet

Black Delrin® Sheet

Dimensions: 12 in × 12 in, Thickness: 1/4 in

1

Make clamp

First create the PVC pipe clamp out of the 1/4 inch delrin sheet, I cleaned it up after the carve with some sand paper.

2

Attach to Z-Axis Motor

Using 2 longer M5 x 30 bolts, attach the plate to the 2 back Z-Axis motor bolts.

3

Build tubing

Using about 3-4 inches of 3/4 inch PVC to a threaded PVC piece, both of which I got at lowes, attach to a threaded piece of 3/4 loc-line:
http://www.modularhose.com/Loc-Line-34-System/34-connectors/Loc-Line-61505

Next a y splitter:
http://www.modularhose.com/Loc-Line-34-System/34-y-elbows/Loc-Line-61511

And then to 2 1ft section of 3/4 inch loc-line tubing:
http://www.modularhose.com/Loc-Line-34-System/34-hose/Loc-Line-61501

Finally 2 3/4 nozzles:
http://www.modularhose.com/Loc-Line-34-System/34-nozzles/Loc-Line-61503

I also spray painted everything black.

Peter Eberley
Just what I was looking for. Thanks!
Peter Eberley
Kevin Davidson
I'm new to my x carve what is this for?
Kevin Davidson
Lee Brewer
I'm assuming this is a dust collection system. Does it work better than the dust collection that comes with the machines now?
Lee Brewer