This is an upgraded wasteboard for the Shapeoko 2 and X-Carve that has the following features.
If you are adding this waste board to the X-Carve Rail kit, you will need additional hardware to do so:
14 pre assembly insertion nuts, 2 bags of part #25281-08
14 Button Head Screws M5 x 20, 2 bags of part #25286-15
There is some final fabrication required by the end user for this product to function. The inserts need to be installed. We have instructions that demonstrate how to do this. Please note the inserts go in from the back side.
Both boards have provisions for adding additional cross members underneath for support. This is strongly recommended for the large version or it will sag over time.
The material is MDF. There may be small scratches, discoloration or scratches on the surface that do not affect performance.