Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

Which X-Carve is Right for You? Learn More.

XCarve dust shoe spindel Insert plate

24 likes
123 opens
76 copies
0 comments
Rick Olsen

Project by

Rick Olsen

General Information

Make your own dust shoe insert plate. I made these from some 3/32 thick plexi from my local hardware store. I used a 1/16 upcut bit and increased the feed rate to 50in/min. Easy-peasy

Like this project Open in Easel®