X-Carve in stock. Ships in 1-2 business days. Call us: (312) 775-7009
(M-F 9am - 5pm CST)

Wasteboard engraving 5cm2

2 likes
65 opens
21 copies
0 comments
Christian Lie Eikefjord

Project by

Christian Lie Eikefjord
Bergen, Norway

General Information

To engrave a 5cm grid onto your wasteboard.

Usefull for the ones that diy their own.
Use the smallest bit that followed in the geting started. Or a V-bit

Depth is set at 1.5mm, i did run it with 0.5mm and i discovered some sagging on my board.

Like this project Open in Easel®