Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

Which X-Carve is Right for You? Learn More.

Spindle Lock and Waste board Square

24 likes
461 opens
249 copies
0 comments

General Information

I made a spindle lock so I do not constantly have to hold down the yellow button while tightening or loosening my bit. I also made a second waste-board square which will be great for an adjustable makeshift jig.
You can use 1/4" or 1/2" wood for the spindle holder and you are ready to carve.

Like this project Open in Easel®