Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

Which X-Carve is Right for You? Learn More.

Remake of "X-carve Clamp Rack (1 of 3)"

Chris Adkins

Project by

Chris Adkins

General Information

This is my version of the clamp holder modified from the one from Jeff Williams published and one of three organizers I made for my tooling and accessories. 3/4" MDF glued up to 1.5". 1/4" round over on the router table to finish the top edges.

Like this project