X-Carve in stock. Ships same business day. Call us: (312) 775-7009
(M-F 9am - 5pm CST)

Remake of "DIRESTA Wood Stool "

0 opens
0 copies
Zach Milroy

Project by

Zach Milroy

General Information

My goal was to make the DIRESTA stool without glue, with less parts, within an hour, and fit on a 24″ × 24″ build area (make 2 from a quarter sheet). This one was cut out of 0.5" MDF at 75ipm, with a DOC of 0.05in and a 1/8" down-cut end mill and took about 57 mins to complete.

Like this project Open in Easel®
Material Description Price
End Mill Sample Pack, 1/8 in Shank

End Mill Sample Pack, 1/8 in Shank

Quantity: 5 (mix of 3 different types), Shank Diameter: 1/8 in, Cutting Diameter: 1/8 in, Type: End Mills, Cutting Length: Varies, Overall Length: Varies, Cutting Material 1: Linoleum, Cutting Material 2: Wood, Cutting Material 3: Soft Metals, Cutting Material 4: Linoleum, Cutting Material 5: Aluminum, Bit Packs: Variety Packs

MDF Wood

MDF Wood (×2)

Dimensions: 12 in × 24 in, Thickness: 1/2 in


This project's Bill of Materials is not complete.

from Inventables