Unfortunately I can’t take a picture of my iPhone in the dock, because I need my iPhone to take the pictures. :)
This was carved from a piece of 2×6 dimensional Cedar that was milled to a thickness of 1.4". Cedar is not a great material for CNC’ing since it has a tendency to tear out, but it’s what I had lying around.
To carve the main body you must extend your carving bit to be greater than the maximum cut depth. In my case the bit was extended to appx. 1.45" this was a very tight carve. It was carved with a Solid Carbide 2 Flute Straight End Mill. To be clear this means that the bit would be extended a little too far, but it mostly worked for me.
There is a second Easel file for cutting out a base to allow a charger cable to pass under.