DW611 Dust Shoe

10 likes
44 opens
21 copies
2 comments
Steven Vasquez

Project by

Steven Vasquez
USA

General Information

DeWalt 611 router Dust Shoe (Vac mount)

Like this project Open in Easel®
1

Materials

1) Poplar Board – 0.75″ × 5.5″ × 24″ – $5.74- Home Depot

2) 1/4"-20: 1.5" long bolt, washer, and wing nut

3) Premium Shelf Liner – Home Depot or Lowe’s
https://www.lowes.com/pd/ClosetMaid-15-75-in-x-8-ft-White-Shelf-Liner/3373768

4) Adhesive backed velcro
https://www.lowes.com/pd/VELCRO-2-in-x-48-in-Black-Roll-Fastener/1052627

5) Hot glue gun

2

Other

Visit my website: https://www.l4makershop.com

Buy my Vinyl Decal here:
http://www.ebay.com/sch/xlycan004x/m.html?nkw=&armrs=1&ipg=&from=

Paul Housinger
I would like to make this, but doesn't it interfere with the locking mechanism for the collet on the dewalt 611?
Paul Housinger
Steven Vasquez
It does, I take it off every time I have to change bits. I used a Wing nut so that I can loosen it quickly without tools. One other thing, use some strong wood, after some months of use the tabs for the bolts broke.
Steven Vasquez