CL-100 Board 1 HOLES

2 likes
24 opens
3 copies
0 comments
Greg Hill

Project by

Greg Hill
Phenix City, AL

General Information

My first X-Carve Project!!!

0.5" MDF, 24? × 24? Sheet, x2 Sheets Required.
Sheet 1 of 2, ToolPath Set 1 of 2.
0.0625" Bit Size.

o Holes are to be used as pilot hole in assembly.
o Holes vary in depth; Some are set to depth 0.25" while others are through-holes.

Like this project Open in Easel®