CL-100 Board 1 CONTOURS

2 likes
28 opens
8 copies
0 comments
Greg Hill

Project by

Greg Hill
Phenix City, AL

General Information

My first X-Carve Project!!!

0.5" MDF, 24″ × 24″ Sheet, x2 Sheets Required.
Sheet 1 of 2, ToolPath Set 2 of 2.
0.125" Bit Size.

o Cut part contours Through All (0.5" Tabbed, OUTSIDE).
o Cut square spot faces to 0.05" (Inside, FILL).
o Cut x2 Holes Through All (Inside, FILL).

Like this project Open in Easel®