Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

Which X-Carve is Right for You? Learn More.

3d printer large format w / makerslide

meyer

Project by

meyer

General Information

volum3dmax110

> 3D printer GREEN
– Filtration of fumes
– Waste recovery

> Max volume printing:
15 × 20 × 22 inch
> autonomous
> Double printhead
> Multi materials
http://www.dailymotion.com/video/x26l72k_volum3dmax110_tech
https://www.facebook.com/volum3dmax

Like this project
Material Description Price
Aluminum Extrusion (20mm x 20mm) - Clear

Aluminum Extrusion (20mm x 20mm) - Clear (×15)

Height: 20 mm, Length: 1000 mm, Width: 20 mm

$135.00

Arduino Mega 2560 R3

Arduino Mega 2560 R3

Type: Mega 2560, Revision: R3

Dual Bearing V-Wheel Kit

Dual Bearing V-Wheel Kit

Type: Wheels dont use 3, Qty: 20 Pack dont use 3

GT2 Belting - Open Ended - 4 Meters

GT2 Belting - Open Ended - 4 Meters (×20)

Width: 6.35mm - don't use, Pitch: 2mm - don't use

MakerSlide - Black Anodize - 5M Tapped

MakerSlide - Black Anodize - 5M Tapped (×5)

Length: 1000mm - 2012 - 2019

Motor Mount, NEMA 17 or 23

Motor Mount, NEMA 17 or 23 (×3)

Material: Aluminum, Color: Black

Smooth Idler Wheel

Smooth Idler Wheel (×4)

Qty: 1 kit don't use, Belt Width: 6.35 mm

Standard Wheel Carriage Plate

Standard Wheel Carriage Plate (×5)

Type: Plate

$16.85

Stepper Motor - NEMA 17

Stepper Motor - NEMA 17

Lead Time: In stock, Holding Torque: 62 oz/in

Stepper Motor - NEMA 23

Stepper Motor - NEMA 23 (×2)

Holding Torque: 140oz-in - 2014 - 2015, Qty: 1, Machine: non-X-Carve

This project's Bill of Materials is not complete.

$151.85
from Inventables

RICHARD DAVIES
Very well thought out design -
RICHARD DAVIES
Robert Roscher
i'd like to build one, do you have a complete bill of materials? thanks
Robert Roscher
meyer
Hello, I did not write a detailed list of the materials used to make my printer
meyer
Marc Cohen
What do you use as a controller for your printer?
Marc Cohen