Inventables

Chicago, IL

The Hardware Store for Designers. We manufacture two 3D carving machines called X-Carve and Carvey. We also created Easel the worlds easiest and free 3D carving software. We sell equipment and supplies in small quantities for purchase with a credit card. Our selection ranges from over 100 colors of acrylic sheets to 3D printers.

Homepage

3D Printer

Upmini

UP Mini

Build Footprint 120 × 120 × 120mm Build Platform Enclosed Print Speed 10-100cm^3 per hour Layer Resolution 250 microns

Quantity: 3

Rep2_press_15x10_low3

Makerbot Replicator 2

This is the fourth generation machine. The resolution capability is 100 microns. To give you a sense of scale there are 25,400 microns in one inch so 100 microns is about the diameter of a human hair. The build volume is 410 cubic inches which is 11.2 L x 6.0 W x 6.1 H in [28.5 × 15.3 × 15.5 cm]. The new machine comes with a 1 lb spool of Natural PLA filament.

Quantity: 1

New_cube

Cube

Voted MAKE magazine’s “easiest to use” and “most reliable” 3D printer. Straight out of the box - you can get started immediately with the Cube's simple setup. Just plug it in and start. The only 3D printer certified for safe at-home use by adults and children.

Quantity: 1

Up_plus_2_01

UP Plus 2

The Up! Plus 2 3D printer is a desktop printer that is as easy to use as a traditional inkjet. You simply plug it into your computer, install the included software, and start printing! This is not a kit, it’s a fully functional, pre-assembled 3D printer. The software runs on Windows and Mac computers

Quantity: 1

3D Carver

Shapeoko2_cropped

Shapeoko 2.0

These are simple, low cost, open source CNC milling machine kits that can be built in about 3-5 hours. Assembly is required before you can use it.

Quantity: 3

Laser Cutter

Fullspectrum

FullSpectrum 20" x 12" Laser Cutter/Engraver

Cutting area: 20"×12", Resolution: up to 1000 dpi and 0.001", Power: 40W

Quantity: 1

Lasercutter

Full Spectrum Desktop Laser Cutter

40W peak (30-35W average) CO2 Laser Engraver and Cutter with 9.5"x14.5" laserable area

Quantity: 1

Vinyl Cutter

Silhouette-cameo_02-xl

The Silhouette CAMEO®

The Silhouette CAMEO® is an electronic cutting machine for personal use. Like a home printer, it plugs into your PC or Mac® with a simple USB cable. However, instead of printing it uses a small blade to cut paper, cardstock, vinyl, fabric and more up to 12" wide and 10 feet long. The machine also has the ability to register and cut printed materials.

Quantity: 1

3D Scanner

Makerbot_digitizer_hero_small

Makerbot Digitizer

With just two clicks, the MakerBot Digitizer Desktop 3D Scanner’s simple yet sophisticated software creates clean, watertight 3D models that are ready to 3D print. The whole process works seamlessly with MakerBot Replicator Desktop 3D Printers and you get standard design files to use on the 3D printer of your choice. You don’t need any design or 3D modeling skills to get started, and it all happens in just minutes.

Quantity: 1